無線傳輸扭力感測器

Lebow's TMS9000 Torque Measurement System represents an advanced generation of rotary transformer sensors designed to operate completely in the digital domain for accurate measurement and output versatility. The TMS9000 series physically integrates rotor and telemetry into one element, with all set-up and output controlled through computer software, providing expansive testing capabilities.

The TMS9000 series integrates three microchip processors to measure torque signals and manage the data. The first processor is embedded in the heart of the TMS9000 sensor's rotor and transmits signal information throught the rotor antenna to the caliper style coupling module. The IP65 coupling module provides power transmission and signal recovery using BNC connectors and co-axial cable.

Signal information is relayed to the TMS9000 signal processing module (SPM) housing two micro processors which share the work of data processing and communications. The first processor verifies incoming data by means of its checksum, then performs scaling in linearization, then passes the data to the second processor where it is converted to the analog, frequency or digital output format chosen by the user. Two way communications between the computer and processing module allows the system to be configured, calibrated and interrogated remotely.

機械性特色:
• No hoop antenna
• System error < 0.05% FS
• High torsional stiffness
• Low rotating inertia
• Vareity of mating flange designs:
- DIN
- SAE
- Flex coupling
- Custom

特色:
• 19 bit digital telemetry: Resolution up to 100,000 counts
• 3kHz frequency response
• Standard outputs: analog, frequency, digital
• Add on interfaces: ethernet, CANopen, USB, PC104
• True shunt cal feature
• NEMA 4/IP65 rated
　

種類	型號	圖片	描述
Flange to Flange	TMS92000		Non contact, no bearings Capacity range: 50 through 8,000 pound feet 【型錄下載】Download Data Sheet
Integral Coupling Design	TMS92005		Works as dual flex disc coupling Compact size High torsional stiffness No bearings 【型錄下載】Download Data Sheet
Circular Keyed Shaft Design	TMS92120		"Drop In" for industry standard designs Non contact, No bearings Capacity range: 50 ounce inch through 2,000,000 pound inch 【型錄下載】Download Data Sheet
Flange to Flange, Industry Standard Bolt Patterns	TMS92002		"Drop In" for industry standard designs Non contact, No bearings Capacity range: 50 ounce inch through 2,000,000 pound inch 【型錄下載】Download Data Sheet
High Capacity Flange to Flange	TMS92002		Non contact, No bearings High Torsional Stiffness Capacity range: 10,000 pound feet through 200,000 pound feet 【型錄下載】Download Data Sheet
Foot Mount Design, Circular Keyed Shaft	TMS92104		"Drop In" for industury standards Non contact No strain gage conditioning required 【型錄下載】Download Data Sheet
In-Line	6200		In-Line Rotary Torque Transducers Frictionless 100-35,000 lb-ins Torque Range Replacement for conventional slip-ring type Wireless Technology 【型錄下載】Download Data Sheet
Clamp On	9300		Clamp On Rotary Torque Transducers Converts Shaft into a Torque Transducer Shaft Sizes from 2.5" to 15.4" 【型錄下載】Download Data Sheet
Thin Profile, In-Line	RTC		Thin Profile In-Line Rotary Torque Sensors Frictionless 100-35,000 lb-ins Torque Range Mounts to standard S.A.E. or Metric Flanges 【型錄下載】Download Data Sheet

Special Application (TMS 9000 Product Line)

種類	型號	圖片	描述
Torque / Temperature Sensor	92002-108		One channel of Torque and one channel of temperature Monitors up to Eight "J" or "K" type termocouples Linear analog outputs for torque and temperature 【型錄下載】Download Data Sheet
Tractor Wheel Torque Sensor	91246-101		Custom Bolt Patterns Non Contact, No Bearings No Strain Gage Conditioning Required 【型錄下載】Download Data Sheet
Torque / Thrust Wireless	96400		Completely Wireless Transmission Rechargable Battery Operation Optional Hand-held Remote Display Non Contact, No Bearings

Wireless

【無線傳輸扭力計】

【靜態測試扭力計】

Wrench Checker

【配件與接頭】