Honeywell
Sensotec為美國生產拉、壓和通用型荷重元的世界大廠。Honeywell
Sensotec可提供標準的、改進標準的或客製化的傳感器，並能快速交貨。很多荷重元能在24小時內從充裕的庫存系統中裝運出貨。其不鏽鋼材質的荷重元滿足工業應用惡劣條件並有極高的可靠性。另外也能提供碳鋼和鋁結構的荷重元。
Honeywell
Sensotec生產的荷重元，內部的傳感單元是使用金屬應變計和半導體，所以Load
Cell可根據你的應用條件選擇以達到最佳的測量結果。測量範圍從25克到
3，000，000磅，同時提供最高水平的精度和可靠性：0.05% to 0.5% F.S.，工作溫度從-60°F到+320°F（-51℃到+160℃），客戶更可根據需求定製標準測試範圍外的要求。
Honeywell
Sensotec生產的荷重元所提供的輸出範圍相當多樣：有1.5 mV/V,
2 mV/V, 15 mV/V, 20 mV/V, 和 1
mV/V/gm等，同時也提供內置放大輸出（0--5V或4--20mA）和RS232或RS485數字輸出。更有一系列的防水型和特殊連接方式等。
Honeywell Sensotec manufactures
a wide range of tension, compression, and universal
measurement load cells. These load cells are manufactured as
standard, modified standard, and custom sensors to provide
fast delivery. Many units can ship from our extensive
stocking program within 24 hours. Our load cell is
industrially rugged and highly reliable because of their
stainless steel construction. We also offer load cells made
of carbon steel and aluminum where these metals are needed
to do the job.
Honeywell
Sensotec load cells use bonded foil and semiconductor so
that your sensor will provide the best measurement possible
given the conditions encountered in your application. These
units measure a wide range of force; 25 grams to 3,000,000
lbs. Honeywell load cells also offer the highest levels of
accuracy and commercially available today; 0.05% to 0.5% F.S.
while coping with temperatures from -60¼F up to 320¼F. Our
custom transducers capable of handling temperatures above,
as well as below, this temperature range.
Honeywell
Sensotec's range of outputs are as varied as any
manufacturer in the world and they include 1.5 mV/V, 2 mV/V,
15 mV/V, 20 mV/V, and 1 mV/V/gm. We can also provide
"on-board" amplification amplification (0-5 V or 4-20 mA)
and digital outputs such as RS-232 and RS-485.
Honeywell
Sensotec also offers a wide range of load cell sizes
including miniature load cells along with an extensive list
of connector types including submersible, underwater cable
connections.
|
