Application Notes

1.Dual Channel DMS Units Can Have Two Identical OR Two Different Sensors

2.Connectors Permit Removal and/or Replacement of Fiberoptic Tips and Cables

3.Side-viewing Is Combined with End Viewing Fiberoptics To Measure Turbine Blade Tip Clearance

4.A 2-Channel DMS Is Used To Measure Axial & Radial Runout Of A Glass Disc

5.For Exposure To 1200 psi

6.For Exposure To 482°C

7.The Sensor Tip Is Submerged In Fluid. How Will The Sensor Respond?(D Model)

8.The Sensor Tip Is Submerged In Fluid. How Will The Sensor Respond?(RC Model)

9.How to Determine the Optimum Distance Between the Printhead and the Paper

10.Use Fiberoptics When Intrinsic Safety Is Required

11.Standard Fiberoptic Cabling is 3 Feet Long. Some Models Can Be Fitted With 49 Foot Long Cables

12.Sensor Options For Measurements In High Magnetic Fields

13.Philtec Sensors Contribute To The Success of the 2003 NASA/JPL Mars Rover Mission

14.Fiberoptic Passthru Solutions are shown for Low, Medium and Ultra-High Vacuum Applications

15.The Distance To Transparent Materials Can Be Measured

16.How To Extend Operating Ranges With Offset and Gain Options

17.DMS Systems Are Provided in 19" Rack-Mount Enclosures

18.A Vacuum Passthru For 8 Sensor Channels Is Space Saving and Cost Effective

19.Small Fiberoptic Sensors Are A Good Choice For Missing Parts Inspection

20.Top-Dead-Center Piston Position of IC Engines is Measured

21.Reflectance Dependence Demonstrated

22.Reflectance Compensation Demonstrated

23.How To Avoid Reflection Interference

24.Retro-Reflective Targets Enhance Auto Engine Diagnostics

25.High Speed Shaft Runout Measurements Are Made With Right Angle Probes

26.Side-Viewing Sensors Are Used To Capture Dynamic Measurements In Tight Spaces

27.Side-Viewing Sensors Are Used To Measure Shaft Orbit & Vibrations In Tight Spaces

28.Temperature Stabilized Amplifiers Are Recommended Where Long term Stability is Required.

29.The Target Is A Potted Resin In Vacuum and High Magnetic Field

30.Sensor Tip Orientation Is Critical With Small Moving Targets

31.Single-Port Weldable Vacuum Passthru Fitting

32.Measurements of Valve and Actuator Dynamics Require Small Sensors with Wide Bandwidth