Automotive Load Cells
The Lebow Seat Belt Sensor
features improved accuracy. Calibration is essentially
independent of belt thickness, which may change under load.
It’s so simple to install. Just remove the pin, lay the belt
on the transducer and replace the pin.
It provides excellent repeatability without the need for the
extensive belt wrap required on previous models.
- Small size
- Installs without “threading”
- Low sensitivity to belt thickness change
The Lebow Pedal Pressure Sensor mounts directly to
the brake pedal with its own mounting clamp. Load applied up
to 1/2 inch off center, produces less than a 0.5% error.
Standard capacity is 300 lbs. This load cell, which is used
for brake pedal force measurements by the automotive
industry, finds many production applications. It adapts to
any of the pedal or bar operated devices used in all
production facilities.
- Low off center loading error
- Easy mounting
- Rugged load surface
|
種類 |
型號 |
圖片 |
描述 |
| Seat Belt Sensor |
3419 |
 |
Small size
- Installs without “threading”
- Low sensitivity to belt thickness change
- 3500 lb.
【型錄下載】Download Data Sheet |
| Pedal Pressure
Sensor |
3663 |
 |
- Low off center
loading error
- Easy mounting
- Rugged load surface
- 50, 100, 200, 300 lb.
【型錄下載】Download Data Sheet |
| Large Brake Pedal
Sensors |
3663-111 |
 |
- Low off center
loading error
- Easy mounting
- Rugged load surface
- 50, 100, 200, 300 lb.
【型錄下載】Download Data Sheet |
|
