|
|
Product
Name+ |
 |
CT4/8-Wheel
|
4 (8) Channel
wheel telemetry system for connection with
strain gages, force, temperature and
vibration sensors as well as high level
input +/-5 or +/-10Volts. · 4 different
carrier frequencies (433.3, 433.7, 434.1 or
434.5 MHz) enable measurements at 4 Wheels
for one car. · A mixed...
More>>> |
|
 |
RPM
8000-DC
|
RPM measurement
for DC engines via the power supply, The
RPM-8000-DC was special developed for DC
engine RPM measurements. This field of
engineering becomes more important in the
future regarding the low noise design of
compact drives, e.g. in the automotive
industry for electrical window opener,...
More>>> |
|
 |
RPM
8000-Standard
|
Contact and
Sensor-less Automotive RPM Measuremen.
Independent of vehicle type, Independent of
engine type, No sensor installation /
mounting, Analogue & digital output signals,
Minimal signal time delay, Highest accuracy,
light, easy and handy. Generally the
RPM-8000 unit is useful in all manner...
More>>> |
|
 |
RPM-8000-PRO
|
Offers a
discerning solution for automotive RPM
measurement without an additional sensor.
Independent of vehicle and engine type, No
sensor installation required, Direct reading
of RPM via LCD, Wide dynamic range, Analoge
and digital output, Small, lightweight,
convenient, Simple and accurate...
More>>> |
|
 |
TEL1-PCM
Torque!!
|
Digital one
channel telemetry system for strain gage
applications on rotating shafts “Controlled
Gain and AZ at receiver side” ,Signal
bandwidth up to 1200Hz (-3dB),Distance
transmitting coil to receiving head 20 mm
(Optional 35mm),Powering transmitting side :
Inductive TEL1-PCM ...
More>>> |
|
 |
TEL1-PCM-BATT
Torque Telemetry
|
Digital one
channel telemetry system (transmitter
battery-powered) for strain gage
applications on rotating shafts “Controlled
Gain and AZ at receiver side” ,Signal
bandwidth up to 1200Hz (-3dB),Distance
transmitting coil to receiving head 150 mm,
Powering via battery 6-9V ...
More>>> |
|
 |
TEL1-PCM-HS
High Speed Telemetry
|
Digital one
channel "HIGH SPEED" telemetry system for
strain gage and ICP applications on rotating
shafts “Controlled Gain and AZ at receiver
side” Signal bandwidth up to 50,000,
Distance transmitting coil to receiving head
20 mm (Optional35mm), Powering transmitting
side : Inductive, ...
More>>> |
|
 |
TEMPTEL8
Wheel Telemetry "Brand NEW"
|
Small 8 channel
Telemetry for Thermocouples K or J ·12 bit
resolution, simultaneous sampling of all
channels · Full galvanic isolated inputs ·
Cold junction compensation · Bandwidth 8x
0-30Hz · Output is linearised for K or J,
+/- 10V analogue output at the receiver side
· Distance up to 10m...
More>>> |
|
|
