【黏貼耗材區】

Surface Cleaning【表面清潔】

• Surface Cleaning Supplies datasheet  (表面清潔用品)

Basic Strain Gage Adhesives【基本黏著劑】

• M-Bond 200  (一般型室溫膠)

• M-Bond AE-10 (室溫膠-可防潮濕)

• M-Bond AE-15 (升溫加熱膠-適用於較AE-10更嚴苛的環境)

• M-Bond 610 (升溫加熱膠-應用溫度範圍較廣)

• M-Bond 600   (升溫加熱膠-較MBond 610快速接著)

• M-Bond 43-B (升溫加熱膠-適用於傳感器應用上)

Special-Purpose Adhesives【特殊型黏著劑】

• M-Bond GA-2   (室溫膠-適用於較粗糙的表面)

• M-Bond GA-61  (升溫加熱膠-100%固化)

• M-Bond A-12   (伸長量較大時的應用)

• M-Bond 300  (低溫接著膠)

• M-Bond 450  (適用於傳感器應用)

Installation Tools【安裝工具】

• Hand Tools  (手工具-Shears, tweezers, pliers, cutters, etc. )

• Tapes  (各式膠帶-General purpose & high temperature. )

• Clamps (夾扣具-Clamps and pads.)

• Heaters  (加熱工具-Heat guns and hotplate.)

Bondable Terminals 【接續端子】

• Introduction (簡介)

• Terminal Construction  (外觀介紹)

• Coding System  (編碼)

• Backing Materials  (背材)

• Terminal Geometries (各式端子)

Soldering Materials 【焊接材料】

• Solders (銲錫-Types 361, 430, 450, 570 and 1240)

• Fluxes (清除劑-Types AR and SS )

• Soldering Units  (溫控烙鐵-Mark V, Mark VIII, WRS)

Wire and Cable 【線材】

• Introduction  (簡介與編碼)

• Single Conductor, Solid Wire  (單芯線-AWP, AWN, AWQ, GWF, HWN, JWN )

• Single Conductor, Stranded Wire  (標準單芯線-DWV, FWK, FWT  )

• Three Conductor, Moderate Temperature  (三芯線-DJV, DFV, DTV, DSV )

• Three Conductor, High Temperature  (三芯線-FFE, FJT, FTE, GJF )

• Four Conductor   (四芯線-DFV, DSV, DTV, FST)

• Flat Ribbon Leads  (橡膠-GL-92R-50)

• Heat-Shrinkable Tubing  (熱縮套管-HST-1)

• Thermal Wire Stripper   (剝線鉗-WTS-1. 2)

Protective Coatings【表層保護劑】

• Introduction   (簡介)

• Coating Selection Chart  (挑選指南)

• Application Notes  (應用手冊)

• M-Coat A  (General-purpose laboratory coating)

• M-Coat B   (Secondary coating as vapor barrier)

• M-Coat C  (Low reinforcement coating. / Elevated temperature use.)

• M-Coat D  (General-pupose laboratory moisture barrier. / Intrabridge wiring anchor and insulation.)

• M-Coat F  (Field applications where conditions are not ideal. )

• M-Coat FBT  (Low reinforcement coating for commercial transducers.)

• M-Coat J  (General-purpose coating for harsh environments. )

• M-Coat W1 (Best water barrier, but poor mechanical protection. )

• 3140 RTV(General-purpose coating in laboratory and field. / Elevated-temperture use.)

• 3145 RTV  (Thicker than 3140 RTV. / Good cable anchor. )

• M-Bond AE-10 and AE-15  (Hard, water-resistant coatings.)

• M-Bond 43-B   (Hard coating with excellent chemical, electrical and mechanical resistance.)

• M-Bond GA-61 (Good chemical and mechanical protection at elevated temperatures.)

Application Kits【套裝組合】

• Introduction  (簡介)

• GAK-2-200  (M-Bond 200系列組合)

• GAK-2-AE10/15  (M-Bond AE10 and AE15系列組合)

• GAK-2-610  (M-Bond 610系列組合)

• MAK-1  

Precision Resistors【精密電阻】

• Introduction    (簡介)

• S-Type Specifications   (S型)

• W-Type Specifications  (W型)

• H-Type Specifications  (H型)

• Shunt Calibration  (跨接校正)

• Bridge Completion Resistors  (電橋補償電阻)

• Bridge Completion Modules  (電橋補償模組)

Instrument【儀器】

• RS-200 Milling Guide   (RS200 殘留應力量測)

• Welding Unit  (可攜式焊接儀器)