|
Honeywell Sensotec manufactures a wide range of
wet/wet and wet/dry differential pressure
transducers, sensors, and transmitters. These
differential sensors are manufactured as standard,
modified standard, and custom products to provide
the fastest possible delivery. Many of these
pressure sensors can ship from our extensive
stocking program within 24 hours. These pressure
sensors are industrially rugged and highly reliable
because of their stainless steel construction
(including wetted parts). Mechanical overload stops
protect the transducer from high overload pressures
in either direction.
Honeywell Sensotec
offers a wide range of transducer technologies such
as bonded foil, semiconductor, sputtered, etc., so
that your sensor will provide the best measurements
possible given the conditions encountered in your
application. These pressure transducers measure a
wide range of pressures; 0.5 psid to 10,000 psid.
Honeywell Sensotec DPs also offer the highest levels
of accuracy and stability commercially available
today; 0.1% to 0.5% F.S. while coping with
temperatures from as low as -100°F up to 325°F. Our
custom transducers are capable of handling
temperatures above as well as below this range.
Honeywell Sensotec's
range of "on board" outputs are varied as any
manufacturer in the world. They include 4 - 20 mA, 0
- 5 V, 0 - 20 mA, 1 - 10 VDC, and ±5 VDC, as well as
0 - 20 VDC. We can also provide in-line
amplification and digital outputs such as RS-232 or
RS-485. Honeywell Sensotec also offers a wide range
of sizes including miniature pressure transducers
along with an extensive list of connector types
including submersible underwater cable connections. |
